A handyman is a jack of all trades. They work on everything from cleaning, to repairing appliances and more. A great handyman is rare. They tend to be very skilled at a very large list of things, and are fast on their feet to provide affordable services that don’t typically fit into what a typical contractor would be willing to bother with. Everything from full scale remodels, installations, replacements, repairs, home repairs and home improvements, etc. Depending on the handyman, their services may be available on a part time, limited basis, or as needed. The work they do can vary based on location. For example, an apartment complex would need someone to work on appliances and the buildings maintenance, while a single family home might have him work on garage door repairs or replace some siding.

The work that a handyman may provide can vary greatly based on their skills, location, and the homeowner’s needs. However, some of the most common services that a handyman provides include:

– Home repairs

– Installing or repairing appliances

– Painting

– Carpentry

– Electrical wiring or repairs (depends on the handyman)

– Plumbing

– Remodeling or repairs

– And many, many more.

This can vary greatly based on the handyman’s skills, location, and what services are provided. However, most handymen charge by the hour. So, it is best to get an estimate before work begins. You can also find handyman services that will give you a quote for the entire project. This is a good option if you have a larger project that needs to be completed.

Hiring a handyman can be a great way to get small jobs done around the house without having to hire a full-time contractor. They are skilled at many things and can provide quality work for a fraction of the cost.

A contractor is more skilled in some specific areas than a handyman. A contractor may be able to provide larger services for example, but your average handyman will almost certainly be more affordable and provide great service that you cannot get from a contractor. So while there are benefits to hiring both (even if you hire different contractors each time), depending on the job, your handyman may be able to do the job just as well at a fraction of the cost, and with more flexiblity.

Handyman services are great for a variety of projects. Some of the most common reasons to use a handyman are:

– You don’t have the time or skills to do the job yourself

– The job is too small for a contractor

Garage floor sweating is usually caused by a high humidity level in the air, which leads to condensation. Over time the floor will begin to look cloudy and feel moist. Sweating can happen when it is cold outside, because inside air tends to be much warmer than outdoors. As the warmer moisture-laden air comes in contact with a cool surface such as concrete it creates condensation. Most garage floors will be unsealed concrete, which is very porous as well. The porous concrete allows water to pass into it, which can cause your floor to sweat.

There are several ways that you can prevent garage floor sweating. Here are some steps you can take:

– Seal the concrete with sealant

– Increase ventilation in the area

Sealing the concrete is typically a good solution to this problem.

Cleaning tile grout is a pretty straight-forward process, but one of the most important aspects is to use the right cleaner and equipment. You want to make sure that whatever cleaner you use is completely safe for tile and grout. The cleaner also needs to be effective at removing dirt and mildew from your tile, without damaging it in any way. 

A deck should be cleaned every six to twelve months, or as needed depending on foot traffic and weather conditions. A deck will typically have a sealant applied every one to three years, which will protect the wood from damage by the sun and mildew.

A drywall nail pop is when the nail pops out of the drywall, leaving a hole. This can be caused by a number of things such as movement in the wall, nails that are too small, or improper nailing techniques. There are a few ways to repair a drywall nail pop. You can use a putty knife to fill the hole with some drywall mud, and then use a sandpaper to smooth it out. But you can’t just fill the hole and paint over it, you need to fix the cause of the nail pop. While seemingly simple, this task can be hard to do well due to how sensitive our eyes are to slight changes in color, texture, and shading. The goal is to have the fix be virtually invisible but that is unfortunately very challenging to do, which is why we recommend hiring a pro.

Asbestos siding is typically found on older homes, particularly those built before 1980. This type of siding can deteriorate over time, and it becomes friable – meaning that the material becomes powdery and easily crumbled by hand. The best way to go about removing asbestos siding is to hire a professional who has experience working with this because it is absolutely not suitable for DIY.

Mildew is a type of fungus that can grow on paint, particularly if it is not sealed or painted properly. It can cause the paint to chip and flake, and it will also discolor the paint. Mildew can be removed with a bleach solution, but you need to be very careful when using bleach because it can damage the paint and the underlying surface. It’s best to use a product specifically designed to remove mildew, and to test it in an inconspicuous area before using it on the entire surface.

There are a number of causes for truss uplift, but the most common cause is that the nails used to secure the bottom chord were not long enough for this purpose. The most effective way to prevent truss uplift from occurring again is to replace those nails with longer ones. Easier said then done, however. We recommend giving a pro call for this.

The process of removing and replacing a popcorn ceiling is not as daunting as it may seem. The first step is to remove all of the popcorn, which can be done with a simple scraping tool. Once the popcorn is removed, you need to repair any damage that was done to the ceiling during the removal process. You then need to prime and paint the ceiling to get rid of the popcorn texture. That said, while not as complex as you might imagine, working on the ceiling in any situation can be laborious and exhausting.

If you’ve noticed that your floor is starting to sag it can be a very frustrating situation, so we recommend doing whatever you can to fix the issue ASAP. The longer you wait, the worse it will get and the more difficult – and expensive – it will be to fix. One of the most common causes of sagging floors is when the underlaying floor structure has slipt, sunk, or broken. This is a job for a pro!

Windows that sweat, or perspire, can be a nuisance and can also lead to the growth of mold and mildew. There are a few things you can do to help fix the issue:

– Clean the windows and frames with a detergent and water solution

– Install weatherstripping or door sweeps on the bottom of the windows

– Replace the windows with insulated models

Mold and mildew can be a big issue on exterior brick. There are both preventative measures, like treating your brick regularly with a mixture of bleach and water, as well as corrective ones that you can take after noticing an issue. You can use a pressure washer to clean the brick, but take care not to damage it. You can also use a scrub brush and a detergent solution. Be sure to rinse well and let the brick dry completely before applying any sealant.

There are a few reasons why paint might start to peel on the exterior of your home. One of the most common reasons is that the paint wasn’t applied properly in the first place, or that it’s been exposed to too much moisture. The best way to fix peeling paint is to remove all of the existing paint, and then to apply a coat of primer before applying the new paint.